Electromagnetic Flow Meter

Sunflow Make

Item Code: SF/EMF/200

OPERATING PRINCIPLE

The operating principle of Electromagnetic Magnetic flow meters is based upon Faraday Law of electromagnetic induction E = kBDV ( E-Induced Voltage, B- Magnetic Field Strength, D-Conductor Width, V- Velocitypf Conductor ) It state that a voltage will be induced in a conductor moving through a magnetic field. The magnitude of the induced voltage E is directly proportional to the velocity of the conductor width D, and the strength of the magnetic field B. Liquid acts as a conductor as it flows through pipes.

Sunflow Electromagnetic Flow Meters are micro-controller based full bore type electromagnetic flow meters to accurately measure the flow rate of conductive liquids and slurries in closed pipes in various industrial application. It's simple and rigid design makes it an obstruction less & maintenance free instrument. The use of Pulsed DC technology offers highest ability & better measuring accuracy in the form of electrical signal 4 - 20mA DC linearly proportional to volumetric flow. LEVSEN full bore flow meter is a cost effective flow meter for conductive liquids such as Raw Water, Chilled water, effluents, Potable water and industrial chemicals.
TECHNICAL SPECIFICATIONS:

Media : Liquids (Conductive)

Conductivity : > 5 µs/cm

Viscosity : 200 cp max

Line Size : 15 NB to 300 NB

Excitation : Pulsed DC

Type of Output : 1) 4 to 20 mA DC, Isolated, HART 2) Pulse

Display : 16 x 2 LCD - 4 digit for Flow Rate & 8 digit for Totalised Flow

Accuracy : +/- 0.5% of F. S.

Linearity : +/- 0.5% of F. S.

Repeatability +/- 0.2% of F. S.

Process Temperature : 75^oC max for Rubber Lining & 150^oC for PTFE Lining

Process Pressure : 10 kg/cm² max

Power Supply : Option 1 : 24 V DC

Option 2 : 90 - 260 V AC, 50 Hz

Material of construction :

Lining - Rubber / PTFE

Flange - CS / MS / SS304/SS316

Electrode - SS 316L / Hastalloy C / Platinum

Coil Housing - MS / SS 304

Transmitter Enclosure : Die cast Aluminum IP 66, Flow Tube IP 68

Process Connections : ASA 150 Flanged as Per Table B16.5

Mounting: In-Line Horizontal (Vertical on request)

Operating Conditions: Temperature 0 to 55^oC / Humidity 5 to 95% non condensing

OPTIONAL Communication Port:

1) RS 485 supporting MODBUS RTU Protocol

2) GSM Communication

3) 4-20mA with HART


Other Information

    Minimum Order Quantity: 1 Piece(s)